STANDARD SIZES
for Kite Brand
TUFNOL
SHEETS
|
Thickness |
WHOLE
SHEETS |
|
|
|
Nominal
Size |
|
|
mm |
mm |
|
|
0.8 |
1200 x
1200 |
|
|
1 |
1200 x
1200 |
|
|
1.6 |
1200 x
1200 |
|
|
2 |
1200 x
1200 |
|
|
2.5 |
1200 x
1200 |
|
|
3 |
1200 x
1200 |
|
|
3.2 |
1200 x
1200 |
|
|
4 |
1200 x
1200 |
|
|
5 |
1200 x
1200 |
|
|
6 |
1200 x
1200 |
|
|
6.4 |
1200 x
1200 |
|
|
8 |
1200 x
1200 |
|
|
9.5 |
1200 x
1200 |
|
|
10 |
1200 x
1200 |
|
|
12 |
1200 x
1200 |
|
|
12.7 |
1200 x
1200 |
|
|
14 |
1200 x
1200 |
|
|
15 |
1200 x
1200 |
|
|
16 |
1200 x
1200 |
|
|
19 |
1200 x
1200 |
|
|
20 |
1200 x
1200 |
|
|
25 |
1200 x
1200 |
|
|
25.4 |
1200 x
1200 |
|
Other sizes up
to 25.4mm thick
can readily be
made to order.
Standard sheet
size is 1200 x
1200mm
approximately.
Sheets 1525 x
1200mm
approximately
can also be made
to order.
Thicknesses
below 1.0mm have
a special matt
finish.
Minimum
production
quantities may
apply for
certain items.
ROUND TUBES
Thousands of
sizes available
up to 228.4mm (9
inches) outside
diameter.
Please contact
us with your
requirements and
we will advise
best we can
offer.
Standard lengths
are 1200mm
approximately
for tubes up to
105mm outside
diameter, and
585mm long
approximately
for larger
diameters.
Minimum
production
quantities may
apply for
certain items.
OTHER SECTIONS
SQUARE and
RECTANGULAR
TUBES
Many sizes
available, from
4.8 x 4.8mm to
69.8 x 69.8mm
(3/16 x 3/16
inches to 2 3/4"
x 2 ľ inches)
outside
dimension.
Please enquire
for full
details.
Standard lengths
are 1200mm
approximately
for tubes up to
105mm outside
diameter, and
585mm long
approximately
for larger
diameters.
Minimum
production
quantities may
apply for
certain items.
ANGLE SECTION
Angles are made
in sizes from
6.3 x 9.5mm up
to 149.2 x
149.2mm (1/4 x
3/8 inches to 5
7/8 x 5 7/8
inches).
Smaller sizes
may be cut from
rectangular
tube, larger
sizes moulded
individually.
Please enquire
for full
details.
Standard lengths
are 1200mm
approximately
for tubes up to
105mm outside
dimension, and
585mm long
approximately
for larger
sizes.
Minimum
production
quantities may
apply for
certain items.
CHANNEL SECTION
Channel sections
are cut
from rectangular
tube. See size
range above
(deduct 3.2mm
(1/8 inch) from
relevant
dimension to
allow for tool
cut.)
Please enquire
for full
details.
Standard
lengths: see
rectangular
tube.
Minimum
production
quantities may
apply for
certain items.
Note: Round Rods
and other solid
sections are not
available in
Kite Brand
TUFNOL. See
Swan Brand
TUFNOL
|
