Acetal - ABS - Nylon - Nylatron - Ertalyte - Polycarbonate - LEXAN - MARLON - ARLA PC - Polyethylene - Tufnol - PEEK - PAI PEI - PI - PPS PSU - PTFe - PVDF - Acrylic - Perspex - REPSOL GLASS - petg - VERALITE - polypropylene - pvC

Engineering and design plastics Ltd, 84 High Street, Cherry Hinton, Cambridge, Cambridgeshire, CB1 9HZ, UK.

  Home Contact us Services Products

Nylatron GS®  - NYLON 6.6 MOS2 FILLED (Dark grey)


NYLATRON® is a brand name that dates back to Polypenco, when DSM acquired Polypenco and Erta the brand names were reviewed and consolidated. The majority of Nylon products were branded ERTALON® but the most established Polypenco brands such as NYLATRON® were kept.

In certain applications, the performance of Nylon 6.6 can be enhanced by the incorporation of fillers. NYLATRON® GS contains a measured quantity of molybdenum disulphide (MOS2). The addition of MOS2 renders this material somewhat stiffer, harder and dimensionally more stable than standard Nylon 6.6 but does result in some loss of impact strength. The nucleating effect of the MOS2 results in an improved crystalline structure enhancing bearing and wear properties.

 NYLATRON GS Material data sheet  NYLATRON GS Safety data sheet 


  • Rod extruded Ć 10mm to 50mm
  • Rod Precision ground to order
  • Tube extruded 30mmO/Dx15mmI/D to45mm O/D x 30mmI/D
  • Plate extruded 8mm to 50mm
  • Machined plate 1.59mm to 50mm
  • Coiled strip 0.25mm to 3.18mm
  • Profiled shapes

A list of the most common Sizes etc that are readily available as standard items can be down loaded here

Nylatron® is a registered trade mark of Quadrant Engineering Plastic Products

The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.